Properties of Fluids

Mass Density:

Understanding the properties of fluids is essential to analyse their behavior in working conditions.
In this post we have written the fluid properties namely mass density, specific weight, specific volume, specific gravity, viscosity, vapor pressure, compressibility and surface tension.

Mass Density (ρ) is the property of a fluid is the mass per unit volume.

Specific Weight:

Specific Weight (w) of a fluid is the weight per unit volume.

Specific Volume:

Specific Volume (v) of a fluid is the volume of the fluid per unit mass.

Specific Gravity or Relative Density:

Specific Gravity (s) of a fluid is the ratio of the mass density of a fluid to the mass density of a standard fluid.

Viscosity:

Viscosity is property by virtue of which it offers resistance to the movement of one layer of fluid over the adjacent layer.

Vapor Pressure:

When a liquid is confined in a closed vessel, the ejected vapor molecules accumulated in the space between free liquid pressure and top of the vessel exert a partial pressure on the liquid surface. This pressure in liquid is known as vapor pressure.

Compressibility:

The normal compressive stress of any fluid element at rest is known as hydro static pressure which arises as a result of innumerable molecular collisions in the entire fluid. The degree of compressibility of a substance is characterized by bulk modulus of elasticity (B).

Surface Tension:

Surface is a measure of fluid tendency to take a spherical shape, caused by mutual attraction of the liquid molecules.

Comments

Fundamental Concepts and Terms in Vibration

Fundamental Concepts and Terms in Vibration Vibration is a mechanical phenomenon, It is a movement first in one direction and then back again in the reverse direction. e.g: the motion of a swinging pendulum, the motion of a tuning fork. Any simple vibration is described by three factors: its amplitude; its frequency and rate of oscillation. Some of the general terms you will come across while studying on vibration topic are Oscillatory motion, Simple Harmonic Motion, Periodic Motion. now we will see the above mentioned terms in brief. Oscillatory motion is described as motion that repeats itself in a regular intervals of time. for example a sine wave or cos wave or pendulum. The time taken for an oscillation to occur is often referred to as the oscillatory period. Simple Harmonic Motion: Simple Harmonic Motion is periodic motion in which the restoring force is directly proportional to the displacement. F = -k*x A simple harmonic motion of a pendulum is an example of m...

Grashof’s Law

Grashof’s Law The Grashof’s law states that for a four-bar linkage system, the sum of the shortest and longest link of a planar quadrilateral linkage is less than or equal to the sum of the remaining two links, then the shortest link can rotate fully with respect to a neighboring link. Consider a four-bar-linkage. Denote the smallest link by S, the longest link by L and the & other two links by P and Q. If the Grashof’s Law condition is satisfied i.e S+L ≤ P+Q, then depending on whether shortest link ‘S’ is connected to the ground by one end, two ends, or no end there are 3 possible mechanisms. They are: Double crank mechanism Double-rocker mechanism and Crank and Rocker Mechanism 1. Double crank mechanism In double crank mechanism, the shortest link ‘S’ is a ground link. Both input crank and output crank rotate at 360°. Grashof’s condition for double crank mechanism: s+l > p+ q Let: ‘s’ = length of shortest link, ‘l’ = length...

Gruebler’s Equation

Gruebler’s Equation Degrees of freedom for planar linkages joined with common joints can be calculated through Gruebler’s equation. Gruebler’s equation is given by the formula: where, n = total number of links in the mechanism j p = total number of primary joints (pins or sliding joints) j h = total number of higher-order joints (cam or gear joints) Mechanisms and structures with varying mobility for Figure (a), (b) and (c) Most linkages used in machines have a single degree of freedom. An example of single degree-of-freedom linkage is shown in figure (a). Linkages with zero or negative degrees of freedom are termed locked mechanisms. Locked mechanisms are unable to move and form a structure. A truss is a structure composed of simple links and connected with pin joints and zero degrees of freedom. An example of locked mechanism is shown in figure (b). Linkages with multiple degrees of freedom need more than one dri...

mechanical engineering

Search This Blog